Zhejiang Hundred Industrial Co.,Ltd

Contact US

Manager: Jeney

Tel: +8613175008615

Fax:+0571 5607 0515

E-mail: Chenxiangju@hundredindustrial.com

Website: www.umdoffice.com

Home > News > Content
Office Chair Daily Maintenance
- Sep 04, 2017 -

Office chairs are daily work and social activities for the convenience of work and equipped with a variety of chairs. Office partners will be divided into narrow and general office chair, narrow sense of the office chair is the man sitting in the posture of the desktop work when sitting back seat, the general office chair for all office chairs, including executive chair, Chairs, conference chairs, staff chairs, conference chairs, visitor chairs, training chairs and so on.

Basic composition

1: Casters: ordinary casters, PU wheel (soft materials, suitable for wood flooring, and the engine room).

2: chair legs: the thickness of the iron frame directly affect the chair life. Surface treatment: polishing, painting, paint (surface gloss, easy to paint stripping), plating removed Atlas (wooden can not be plated), plating quality is good, it is not easy to rust.

3: gas rod: also known as the extension rod, used to adjust the height and rotation of the chair.

4: Chassis: hold the seat of the seat, the following connection with the gas rod.

5: chair: from the board, sponge, fabric composition. The quality of the board is usually not felt by the consumer. Sponge: renewable cotton, new cotton. 99% of the manufacturers are used with both, the thicker the more hard, the higher the cost, the appropriate thickness, the hardness can be appropriate. Hand seat, fabric: Ma Rong, mesh, leather. Plastic frame pressure on the cloth. Such chairs are more breathable.

6: Handrail: Thickness affects quality.

7: seat back seat (corner code): seat and back is split, the use of steel or steel plate, steel, usually 6mm or 8mm thick. But the width of less than 6cm of steel, must be 8mm thick.

8: back: steel frame, plastic frame chair, made of mesh combination, with breathable.

9: waist pillow: reflect the comfort of the chair.

10: headrest: the performance of the chair comfort.

Daily maintenance

Should be carried when carrying light, pay special attention to avoid collision.

Sedentary should always be patted by the sedentary parts and the edge, to restore the status quo, to reduce the concentration of seizures due to the phenomenon of depression.

Leather should be placed away from the heat dissipation and should avoid direct sunlight, is strictly on the exposure to light exposure.

When you usually clean, please do not rub heavily, so as not to damage the epidermis. For long or accidentally stained leather sofas, office chairs, can be dipped in the appropriate concentration of soapy water (or detergent, water content of 40% to 50%) scrub. After wiping with water, and then dry with a clean cloth can be. Do not use strong decontamination (such as decontamination powder, chemical solvent turpentine, gasoline or other inappropriate liquid) cleaning.

office chair

In use should try to make the center of gravity in the middle of the pressure bar to ensure that the pneumatic rod movements turn light and flexible; long after the office chair should always check the mechanism of the screw is loose, if loose due to timely tightening; spring and knob is loose , The spring should be based on the user's own weight adjustment elasticity, so that the seat back to ease, rely on the most comfortable is appropriate.

It is forbidden to sit or put too heavy objects on the arm of the sofa or office chair.

To strictly follow the instructions to regularly maintain the office chair, so as to extend its service life.

Do not put the office chair as long as the sun place for too long, this will make some plastic aging, resulting in hydrogen brittle phenomenon.

Clean attention

A: First of all, of course, is to understand the office chair material, but the general office chair legs are solid wood and iron-based, stool surface is leather art or fabric, in the cleaning of different materials when the chair cleaning method is not the same.

Second: If it is leather art office chair, in the leather when the best cleaning agent in the inconspicuous position to try to see if it fades. If there is fading situation, then use water to dilute; special dirty when available temperature of water, let the natural dry.

Three: solid wood office chair feet, you can directly wipe with a dry cloth, and then play some cleaners, do not use too wet cloth wiping, and then to dry, so that the internal decay of solid wood to speed up.

Four: general cloth stool cleaning method is to spray cleaning agent, gently wipe. Especially dirty, you can use warm water combined with detergent cleaning. Do not just brush rub, so that cloth is easy to look very old.